Home
I'll start a thread with some build pics.
Rear axle is gone, innards for D30 are gone. Atlas is in the floor. I guess that's progress.
Rear axle is gone, innards for D30 are gone. Atlas is in the floor. I guess that's progress.
2 posters
Build Pics
Robbie- Knower of All
- Posts : 36
Join date : 2009-07-11
Tulip- Admin
- Posts : 267
Join date : 2009-02-03
Age : 53
Location : Van Alstyne, TX ( Might as well call it Oklahoma)
Are you doing anything to the frame or back halfing the Jeep?
Robbie- Knower of All
- Posts : 36
Join date : 2009-07-11
Yep, straight back where it curves down. Still need to seat at least 3.
Robbie- Knower of All
- Posts : 36
Join date : 2009-07-11
What I have:
1991 Ford D60 kingpin DRW front axle
..Detroit Locker
..5.13 gears
..Yukon 35 spline outers
..Drive flanges with 4x2 replacement slugs
1990 Ford E350 (van) semi-float drum brake 35 spline rear
..Have brake mounts for ¾ ton Chevy discs
..Need the calipers and rotors
PSC P-Pump conversion with large external reservoir
4.3:1 Atlas and shifters
Am going to purchase:
PSC dual-ended full hydro steering
High steer arms for the above
Branik lower links
Heims of some sort – TBD
Pre fabbed tabs, mounts, etc.
Coil-over and/or air shocks
Yokes for Atlas (haven't decided on size yet)
Making:
DOM upper links
Determining:
Braking
I will modify this list as we talk.
1991 Ford D60 kingpin DRW front axle
..Detroit Locker
..5.13 gears
..Yukon 35 spline outers
..Drive flanges with 4x2 replacement slugs
1990 Ford E350 (van) semi-float drum brake 35 spline rear
..Have brake mounts for ¾ ton Chevy discs
..Need the calipers and rotors
PSC P-Pump conversion with large external reservoir
4.3:1 Atlas and shifters
Am going to purchase:
PSC dual-ended full hydro steering
High steer arms for the above
Branik lower links
Heims of some sort – TBD
Pre fabbed tabs, mounts, etc.
Coil-over and/or air shocks
Yokes for Atlas (haven't decided on size yet)
Making:
DOM upper links
Determining:
Braking
I will modify this list as we talk.
|
|
|